EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead. NOTE: Additional freight costs can occur in orders of 3m tracks.
EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead.
EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead.
Straight joint for EUTRAC 3-circuit tracks. For structural reasons, a mechanical bracket (R11354, R11355 or R11356) is required for suspension installations. Maximum load 16A.
EUTRAC 3-circuit recessed track system made of extruded aluminium profile, which also serves as earthing. Inside, two embedded plastic profiles through which four copper conductors with a diameter of 2.5 mm are routed. Any profile can be easily cut to the desired length. The ends of the wires do not need to be cut or bent. When using halogen sources, the minimum installation height is 2.5 m. Below this height we recommend replacements in LED sources.
EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead. NOTE: Additional freight costs can occur in orders of 3m tracks.
EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead.
EUTRAC 3-circuit track. The profiles can easily be cut into desired lengths, with no need to cut or bend any wires. If used with halogen light sources the minimum installation height is 2.5m. For use below this height, we recommend using LED light sources instead.
Straight joint for EUTRAC 3-circuit tracks. For structural reasons, a mechanical bracket (R11354, R11355 or R11356) is required for suspension installations. Maximum load 16A.
EUTRAC 3-circuit recessed track system made of extruded aluminium profile, which also serves as earthing. Inside, two embedded plastic profiles through which four copper conductors with a diameter of 2.5 mm are routed. Any profile can be easily cut to the desired length. The ends of the wires do not need to be cut or bent. When using halogen sources, the minimum installation height is 2.5 m. Below this height we recommend replacements in LED sources.